Changing IP address on a VLAN

[Eric Hutchinson_2]

This question is for version 7 running on a HPE 5900 AF.

i know this sounds like a basic question but I cannot find in the layer2 or layer3 documentation how to do this.

I have a vlan interface with an ip address associated

"interface Vlan-interface10
  ip address xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx"

How do I change the ip-address?

Thanks

[parnassus · Accepted solution]

Hi, simply enter VLAN 10 context and execute the ip address n.n.n.n m.m.m.m command where the former (n.n.n.n) is the IP Address you want to assign to that VLAN id and the latter (m.m.m.m) represents its Subnet Mask...or, if the new IP address n.n.n.n overlaps with the existing one you're trying to replace, execute, always inside the VLAN 10 context, first the undo ip address command followed by the ip address n.n.n.n m.m.m.m command.

[Eric Hutchinson_2]

Thanks parnassus. Will do