Comware Permitted but not Passing

[techiej]

Hi

Sorry Comware isn't something I have to deal with all that much but I can't seem to find the answer to this.

I have a switch port that I've permitted the VLAN 2822 on and appears as permitted but isn't "Passing" it 

Port link-type: Trunk
VLAN Passing: 1(default vlan), 101, 108, 290-292, 3097
VLAN permitted: 1(default vlan), 101, 108, 290-292, 2882, 3097

I can't really find what the difference between passing and permitted is and how it's best to resolve the issue 

any help would bre appreciated 

Thanks 

[HP-Browniee]

How did you configure the port?

it should be somthing like this:

port link-type trunk
port trunk permit vlan 2882

[techiej]

That's the commands I used to set this up

[parnassus]

Can you provide the output of display port trunk command?
Do you have an host on that permitted VLAN you added to test VLAN passing through that port trunk?