Coper SFP+ 10GBaseT in HP HPE FlexNetwork 5130 EI Switch JG932A

[VadimOd]

Hello,

Someone was able to successfully use a copper SFP + 10GBaseT RJ45 module
(distance about 10-15 meters Cat.6a or Cat.7 patchcord) in the HPE FlexNetwork 5130 EI Switch JG932A?

(I read carefully the documentation and saw that copper 10Gbit SFG + modules
for the HPE FlexNetwork 5130 EI Switch series are not mentioned in the specification)

But I am asking about real life and real situations.
Someone tried copper SFP + for the 5130 series, for example these:
HP Aruba 10GBASE-T SFP + RJ45 30m Cat6A XCVR or equivalent?

Thanks for the experience!

[drk787]

Hi @VadimOd 

The supported transceivers are listed in the quick specs below, any other model apart from the model listed, HPE does not guarantee the functionality.

Quick specs HPE 5130: https://h20195.www2.hpe.com/v2/getdocument.aspx?docname=c04394228#

When you say 'HP Aruba 10GBASE-T SFP + RJ45 30m Cat6A XCVR' I guess the part number is JL563A. As per the below URL it says "10GBASE-T SFP+ transceiver, RJ45 30m Cat6A, for use with selected Aruba switches'

https://buy.hpe.com/us/en/options/transceivers/transceivers/networking-sfp-form-factor/aruba-sfp-rj45-transceivers/aruba-10gbase-t-sfp-rj45-30m-cat6a-transceiver/p/JL563A

List of supported switches for transceiver JL563A is available in the below URL including supported Aruba-CX software version.

https://support.hpe.com/hpesc/public/docDisplay?docId=a00028947en_us