Dual Fabric Configuration - HPE 5710

[ralemageno]

Hi,

I am deloying new setup - Nimble and proliant servers all connected to 2 x HPE 5710 Switches . Initial configuration for switch is fine - now I want to configure the dual fabric fiber channels for the proliant servers and the Nimble Storage. I have seen the ISCSI guide, wondering if anyone can assist to show me where I can get the guide for the Fiber setup? Or if anyone can assist with commands for this?

thank you,

[Ivan_B · Accepted solution]

Hi @ralemageno !

I highly recommend you these two guides

• FCoE Configuration Guide - https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00078519en_us
• FCoE Command Reference Guide - https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00078540en_us

Hope this helps!

[Ivan_B]

Hi @ralemageno !

If my proposed solution helped you, please, mark the post as accepted solution. If you need any further clarification, just let me know.

Thank you!