Firmware Upgrade trouble!!

[batusai_axn]

Hi to all,

I was upgrading my 3com 3c17304 Switch when my power when out and now my switch doesnt want to work anymore, LED's are stuck with Unit (blinking) and self test on orange, i also cant seem to get any response from hyperterminal. is there any way to revive this?

Thanks,

[Fred_Mancen_1]

You can try to perform a XMODEM connection and upload the firmware to the switch. You need to boot the switch already connected to the console, press CTRL+B sequence and follow the instructions in the menu in order to upload the file. Remember to change the console speed to the maximum speed (115000 bps).

HTH