h3c stp instance vs spanning-tree instance 1 priority 2 procurve

[agro-laine]

Hello

i have a question about the instances on the h3c on the 5130 model when i try to config the mstp at the priority levels why we have to set the priority 0 or 4096

"stp instance 1 to 2 priority 4096"

why have little

not to do as on the procurve?

"spanning-tree instance 1 priority 2"

thank you

[parnassus · Accepted solution]

Priority ranges from 0 to 15 in increments of 4096: so 0 means 0 (lower priority = higher probability to become root), 1 = 4096 and so on up to 15 = 61440 [*]

[*] the sequence should be 0 4096 8192 12288 16384 20480 24576 28672 32768 36864 40960 45056 49152 53248 57344 61440.