Help with configure Cisco ip phone in Hpe 5510 Switch

[EliEli]

Hi,

I need help with configure the interface port in Hpe 5510 Poe SW, that will work with Cisco ip phone.

the Ver of the 5510 sw is : 5510hi-cmw710-system-r1122p02.bin

the cfg that i tried is:

interface GigabitEthernet1/0/6
port link-mode bridge
port link-type trunk
port trunk permit vlan 1 to 2
port trunk pvid vlan 2
voice-vlan 10 enable
lldp compliance admin-status cdp txrx
cdp voice-vlan 10
poe enable
#

Thank you

[akg7 · Accepted solution]

Hi,

Can you please add this comamnd as well:

'port link-type hybrid'

You can refer HPE FlexNetwork 5510 HI Switch SeriesLayer 2—LAN SwitchingConfiguration Guide from below link and see section 'Configuring voice VLANs' on pg. 173.

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c04904726

Thanks!

[EliEli]

Thank you.

Now it's work.