HP 10508 Switch - No Web GUI?

[FalconSez]

Greetings All,

We recently migrated from the older 3Com S7903E to a new HP 10508 switch.

One thing I noticed is that there doesn't seem to be a command to enable Web Interface (ip http enable).

The software version for the new switch is per the details below:

HP Comware Software, Version 7.1.035, Release 2105P05
Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P.
HP 10508 uptime is 25 weeks, 1 day, 23 hours, 10 minutes
Last reboot reason : Warm reboot

Boot image: flash:/10500-CMW710-BOOT-R2105P05.bin
Boot image version: 7.1.035P22, Release 2105P05
System image: flash:/10500-CMW710-SYSTEM-R2105P05.bin
System image version: 7.1.035, Release 2105P05

We spoke to the HP engineer who helped in in the migration and he said he was able to apply "ip http enable" via command line on a 10500 using Comware 5 software. I'm not sure either way.

Any insight would be appreciated.

Thanks!