HP COMWARE V5 IPSEC VPN NAT ISNT WORKING

[FelipeMolina]

Hello, I need some help

Im trying to set an IPsec VPN between an MSR and a Cisco ASA, but the owner of the ASA tell me that I need to do a NAT by 1 IP, for example:

LAN MSR: 172.16.1.0/24

LAN ASA: 10.1.0.0/16

IP to do NAT: 10.1.1.1/32

So, the interesting traffic on the ASA is Local:10.1.0.0 Remote:10.1.1.1, but I dont know how to do a NAT by the 10.1.1.1 that work and  without drop the internet connection.

I dont know how to do this o check it on comware 5, please some help

[network_king]

Hello,

Please refer below link for configuring ipsec 
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c02659411 

[FelipeMolina]

I have that doc but I really think that my problem isn't the IPsec VPN actually, because I setup another two IPsec VPN on this device, my problem is the NAT that I need to do.

G0/1.1= LAN MSR

G0/0= WAN

So, I need to do this: LAN MSR => G0/1.1 => NAT with the IP 10.1.1.1/32 =>G0/0 

I don't know if it is possible  but that is what I need. I can't start the Phase1 if I don't try to establish the VPN from that IP