Comware Based
1830900 Members
3027 Online
110017 Solutions
New Discussion

HP MSR router, configure multiple IP's on WAN interface

 
maverh
Occasional Contributor

HP MSR router, configure multiple IP's on WAN interface

HP MSR router, configure multiple IP's on WAN interface
The router is connected in the datacenter on a Switch.
We received 10 public IP's in the same subnet.
We want to nat some public IP's to local subnet example 192.168.1.0/24
We want to use the public ip's direct on the servers without nat.

How can we configure this?
Do i need to work with subinterface's on the wan0/0