HPE 1620 - telnet configure ports

[daniel_mcr]

Hi all,

I have a HP 1620 switch at home, which I'm trying to configure via telnet (I do have access via the web interface). At work I am used to logging in via telnet (different model) and then typing system-view to then configure ports accordingly etc.

I login as admin, however system-view is unrecognised and typing question mark only seems to give a limited number of commands, how do I change to a view where I can:

1/ Configure a trunk port

2/ Configure an access port

Many thanks

[parnassus]

AFAIK the HPE OfficeConnect 1620 Switch series is engineered to be managed through Web Based Management and not via CLI (SSH/Telnet) apart from few commands needed for setting things up initially (if default need to be changed).

[daniel_mcr]

Hi Parnassus,

Thank you for your prompt response on a weekend, appreciated.

Thanks for clarifying, I've downloaded the manual and will take a look how to accomplish the changes I require.

Cheers

Daniel

[parnassus]

Yes, if you need to configure a port PVID, port's vlan mode (access mode or trunk mode) and other VLAN related items...then "Configuring VLANs" is the right Chapter to start with! See here.

[asdru1516]

Sorry

I get this error when placing an ip when assigning to a VLAN (The numer of VLAN interfaces exceeded the maximum) switch 1620 48g JG914A