HPE 5130 IRF VLAN communication blockade

[EarlGay]

Hello,

I am running three JG934A (Version 7.1.070, Release 3506P06) switches with a ring topology type.

The IRF stack is running very well but I am struggling with the VLAN communication between those switches.

VLAN 1 as default is working well for all switches but the communication on VLAN 10 does only seem to work within the same Member ID 1.

Source:
VLAN 10 on port GigabitEthernet2/0/31 (not working)
VLAN 10 on port GigabitEthernet1/0/31 (working)

Destination:
Ten-GigabitEthernet1/0/51

Is there some secret hint? or is the topology?

Topology Info

 -------------------------------------------------------------------------

               IRF-Port1                IRF-Port2          

 MemberID    Link       neighbor      Link       neighbor    Belong To

 1           UP         2             UP         3           f010-90db-7402

 2           UP         3             UP         1           f010-90db-7402

 3           UP         1             UP         2           f010-90db-7402

Thank you in advance!

[Ivan_B · Accepted solution]

Hello @EarlGay !

It will help if you post the configuration details of those ports.

Thank you!

[EarlGay]

Hi,

please delete or close this discussion, I simply didn't submit the configuration lol.