HPE Comware 5130 Version 7.1.045 Release 3111P03 LLDP Issue

[Fhassan]

Team, 

I have successfully created IRF for 2 switches HP 5130 series. After the irf Configuration i am able to see the IRF Physical port  in LLDP NEighbour inforamtion. Is this normal because in previous comware version i am not bale to see? Can any one tell irf physical ports will appear when gettintg the LLDP information from the switch. 

display lldp  neighbor-information list

System Name Local Interface Chassis ID Port ID
SP-DC2-Core-SF-SW-01 GE1/0/23 2c23-3a43-e2ca Ten-GigabitEthernet1/1/23
SP-DC2-Core-SF-SW-01 GE1/0/24 2c23-3a43-e2ca Ten-GigabitEthernet2/1/24
SP-DC2-Extranet-Rtr0 GE1/0/44 7848-59e5-0fae GigabitEthernet0/0
1
SP-DC2-DMZ-SW-01 GE1/0/47 2c23-3ab5-e8d7 M-GigabitEthernet0/0/0
SP-DC2-Int-Rtr01 GE1/0/48 7848-59f9-7e3a GigabitEthernet0/2
SP-DC2-Mgmt-SW-01 XGE1/0/51 2c23-3a3c-72be Ten-GigabitEthernet2/0/51
SP-DC2-Mgmt-SW-01 XGE1/0/52 2c23-3a3c-72be Ten-GigabitEthernet2/0/52
SP-DC2-Core-SF-SW-01 GE2/0/23 2c23-3a43-e2ca Ten-GigabitEthernet2/1/23
SP-DC2-Core-SF-SW-01 GE2/0/24 2c23-3a43-e2ca Ten-GigabitEthernet1/1/24
SP-DC2-Extranet-Rtr0 GE2/0/44 7848-59e5-107a GigabitEthernet0/0
2
SP-DC2-Int-Rtr02 GE2/0/48 7848-59f9-84ef GigabitEthernet0/2
SP-DC2-Mgmt-SW-01 XGE2/0/51 2c23-3a3c-72be Ten-GigabitEthernet1/0/51
SP-DC2-Mgmt-SW-01 XGE2/0/52 2c23-3a3c-72be Ten-GigabitEthernet1/0/52

Thanks/Fahad