IRF on JH149A

[shijuganga]

Dear All,

We recently upgraded L3 Switch to (HPE 5510 24G SFP 4SFP+ HI 1-slot Switch JH149A) and configured two switches through IRF.

Need some help how the secondary Switch access on Web. Primary is able to browse through WEB.

Hope my question is clear to get solution.

Regards,

Shiju

[parnassus]

I hope I've understood you correctly: I'm under the impression that you want to connect to IRF Member 2 via HTTP...but, on a well formed IRF fabric, there is only one IP Address used for Management (SSH/HTTP/Telnet, etc.) - as example on M-GigabitEthernet0/0/0 - and that address is automatically associated with the OoBM port of actual IRF Member with Master role...so you can't connect to IRF Member 2 directly if, as I suppose, it owns the Standby role.

[shijuganga]

Thanks for quick reply.

Well understand. That means if i need to change anything. I need to walk near switch and connect on console port.

Any other way so that work remotely.

[parnassus]

Absolutely not! a well formed IRF fabric will let you to configure anything of physical switches from IRF Master since the IRF is a logical switch made of its physical members switches...so, example, configuring interface 1 of IRF Member 2 is a matter of just configuring interface 2/0/1 (2=IRF Member id, 0=Slot).