Local Mirroring Port (bei HP 11908 Comware)

[Mikhail13]

Guten Tag,

könnten Sie mir helfen...

Ich möchte Local Mirroring Port konfigurieren. Ich muss Datenverkehr von mehreren VLAN an den Monitor Port senden.Ports befinden sich auf demselben Switch.Aber es funktioniert nicht.

Google Translated:

Hello, could you help me ... I want to configure Local Mirroring Port. I need to send traffic from multiple VLANs to the monitor port, ports are on the same switch, but it doesn't work.

[30.30.30.30]interface Ten-GigabitEthernet 1/0/20

[30.30.30.30-Ten-GigabitEthernet1/0/20]port link-type trunk

[30.30.30.30-Ten-GigabitEthernet1/0/20]port trunk permit vlan 13
[30.30.30.30-Ten-GigabitEthernet1/0/20]exit

[30.30.30.30]mirroring-group 1 local

[30.30.30.30]mirroring-group 1 mirroring-port Vlan-interface 13 both

[30.30.30.30]mirroring-group 1 monitor-port Ten-GigabitEthernet 1/0/20

The type of the mirroring port in the mirroring group is not supported.

[30.30.30.30]display mirroring-group 1
Mirroring group 1:
Type: Local
Status: Incomplete
Mirroring port:
Vlan-interface13 Both

Was mache ich falsch?

What am I doing wrong?

Viele Grüße
Mikhail

[DIYO]

Hello Mikhail,

die Befehle sind korrekt, es gibt allerdings Einschränkungen, z. B.

·       In IRF mode, the device do not support mirroring packets from the specified source VLANs to the monitor port.

·       You cannot configure port mirroring when the monitor port and the source port (or port of the source VLAN) are on two IRF members.

Befehl:

mirroring-group group-id mirroring-vlan vlan-list { both | inbound | outbound }

Falls es nicht funktionirt, senden Sie bitte die Produktnummer sowie die Konfiguration.

Grüße