Password Swicht Core 3COM 2928-hphr PLus

[ykzamorpheus]

Password Swicht Core 3COM 2928 hphr PLus

hello, I have a model swichte Swicht Core 3COM 2928-hphr PLus  I do not have the password, is there any way to recover it without resetting or factory defaults?

the swicht has vlans and I do not want to reset

[network_king]

HP Baseline Switch 2948 - How to reset the password on a switch 2948

3Com Knowledgebase Article

Title:

HP Baseline Switch 2948 - How to reset the password on a switch 2948

Product:

3CBLSG48 - 3Com Baseline Switch 2948-SFP Plus

Fix:

The resetting of the password requires the installation of a console cable to the console port.

Be sure the terminal emulator program is set to VT-100 management using compatible, 38400 baud rate, no parity, 8 data bits and Console connection one stop bit.

Use the included cable, or be sure that the pin-out complies with a standard null-modem cable

Once the cable is connected, reboot the switch. Type a Ctrl/C until you enter the failsafe mode. This will be denoted with the prompt: "CFE>"

At the prompt run the following commands:

CFE> passwrd

CFE> reset -sysreset

At this point the password has been reset.

Symptom:

Baseline Switch 2948 - How to reset the password on a switch 2948

Fact:

Baseline Switch 2948

Password Recovery

Ref: user guide>  http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c02581575-1.pdf