Policy Based Routing on H3C S7506E Switch

[liban123]

Hi,

I would like to configure some Policy Based Routing on my Core switch.But unfortunately I cant get proper documentation on this from the web.Since I am new to HP I am not clear on the meaning of the syntax mentioned on most exmaples I got from internet.

My requirement is pretty basic.

If the traffic is coming from source address - 192.168.10.10/32 or from 192.168.110.0/24 then it should be re-routed to 10.10.10.10. All other traffic should go to 172.16.16.16 which has been already being configured as a static  route using the command "ip route-static 0.0.0.0 0.0.0.0 172.16.16.16".

Please help.

[Peter_Debruyne]

Hi,

manuals for the 7500 can be found here:

The PBR is explained in the IP Routing chapter:

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/action.process/public/psi/manualsDisplay/?sp4ts.oid=4177519&javax.portlet.action=true&spf_p.tpst=psiContentDisplay&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.prp_psiContentDisplay=wsrp-interactionState%3DdocId%253Demr_na-c03586718%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken

There are several config examples included (make take note of the difference between host traffic (traffic from switch itself) and user traffic (coming in on routed/vlan interfaces), the last one is what you need)

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/action.process/public/psi/manualsDisplay/?sp4ts.oid=4177519&javax.portlet.action=true&spf_p.tpst=psiContentDisplay&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.prp_psiContentDisplay=wsrp-interactionState%3DdocId%253Demr_na-c03586718%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken

Hope this helps,

Best regards,Peter.