HPE Community
Comware Based
1855247 Members
4232 Online
104109 Solutions
New Discussion

Problem about dinamically assigned VLAN by a radius on a-series

 
Nazzareno Taborgna
Occasional Contributor

‎11-12-2015 09:58 AM

‎11-12-2015 09:58 AM

Problem about dinamically assigned VLAN by a radius on a-series

Hello,

I have several a-series switches with mac-authentication and  VLAN assigned by the radius server.

These switches are working fine, but I would like to restrict the access only to some VLANs, even in case of successfully authentication. Example:

In my configuration there are the vlan: ( 1, 2, 8, 9, 11, 32, 33, 34, 35, 36, 37, 45, 90, 112, 116 and 201 ).

I am also configuring unnecessary VLANs to get an easier life with the stp.

From this switch I expect access only from VLAN 8 and 11, but an user by moving its equipment from another area, could make a successfully authentication on VLAN 9. I want prevent the access to the VLAN 9 from this switch. Is there any way to do this?

 

 

 

 

 

 

 

 

 

 

 

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.