Stack 5130 betwen JG933A and JG934A

[SLEPLAT]

Hi,

Is it possible to create a stack (IRF) with two different HP 5130 models.
For example with a model HP 5130 (JG933A) and a model HP 5130 (JG934A) because I need a combo

Let it advise you between JD119B and JD118B for enterprise LAN.

When buying a Swtich 5130, is the Direct Attach Cable from Stack supplied?

[drk787]

Hi,

Yes IRF can be formed between HP 5130 (JG933A) and  HP 5130 (JG934A) as they are same series switches.

Regarding DAC cable, you need to buy it saperately, it will not come along with the switch when you buy.

IRF configuration guide for your reference: https://support.hpe.com/hpsc/doc/public/display?docId=c04771708

[SLEPLAT]

Hi,
Finally, after study we want to set up the following network:

Network core

Stack :
5510 HI (JH149A) x2   // Should it buy the alimenations in addition ?
5510 HI (JH146A) x1   // Should it buy the alimenations in addition ?
DAC (JH694A)
Gbic (JD118B)

Foot of Building
5130 EI (JG937A)
DAC (JH694A)
Gbic (JD118B)

Does the purchase of this equipment seem correct to you?

Best regard

[drk787]

Hi,

Yes with 5510 HI you can setup IRF and you will require additiona DAC cables.

Also the switches might not come with power supply unit and fan tray by default, check with your local sales team regarding this.