9550 errata

[PSH]

Users of the 9550 might like to be aware of a couple of errors in the User Guide relating to the console port:

1) The bit rate should be 115200 bps and not 15200 as indicated on page 61

2) In order to interpret the pinout table (figure 36 on page 75) correctly with reference to the cable picture on page 74,



P1 is the D-SUB 9 and NOT the RJ45



P2 is the RJ45 and NOT the D-SUB 9



I can confirm that on the basis of the two points above the console port does work.

Dead console ports are not much use!