HPE Community
Comware Wireless / Unified Series
1823064 Members
3106 Online
109645 Solutions
New Discussion

HP Access Point 560

 
hammadraza
Occasional Contributor

‎01-26-2017 08:42 AM

‎01-26-2017 08:42 AM

HP Access Point 560

How we Reset Password Access Point 560 ?

0 Kudos
1 REPLY 1
Marky_Mark
Advisor

‎01-27-2017 05:27 AM - edited ‎01-27-2017 05:29 AM

‎01-27-2017 05:27 AM - edited ‎01-27-2017 05:29 AM

Re: HP Access Point 560

Hello!

The 560 is controlled by whatever controller you have.  There isn't a password to reset usually.

To reset a 560 you put a pin in the hole on the underside then plug in the POE network cable and let the lights on the front of the 560 flash three times and let go.

If you push in the reset button too long, it will go into firmware upload mode.

Then it is back to factory settings.

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.