WX3024 & WA2620-AGN Do Not Talk

[Switchinator_1]

The WA2620 does download it's image from the controller.

Image download in progress for AP [testap1]
Failed to connect to AC for AP testap1 [Serial-ID 219801A0AA909CG01373]

WA2620-AGN is brand new. Probibly not configured correctly.
Do I need special FIT software for this AP to operate in managed mode
using the WX3024 controller? Auto_AP does not appear to work.

Could somebody please post a basic configuration for a WA2620 ?

Here is my WX3024 config and my WA2620 config.

I'm sure I'm missing something simple.

begin WX3024 Config

====================

[WX3024]dis curr

#

 version 5.20, Release 3111P01, Release 3111P01

#

 sysname WX3024

#

 domain default enable system

#

 ip host ns.somedomain.org 10.x.x.x

 ip host ns3.otherdomain.org 10.x.x.x

#

 telnet server enable

#

 portal trap server-down

#

 oap management-ip 192.168.0.101 slot 0

#

 wlan country-code US

#

 wlan auto-ap enable

#

vlan 1

#

domain system

 access-limit disable

 state active

 idle-cut disable

 self-service-url disable

#

user-group system

#

local-user admin

 password cipher G%3Q/UW6aBaQ=^Q`MAF4<1!!

 authorization-attribute level 3

 

service-type ssh telnet

#

wlan rrm

 dot11a mandatory-rate 6 12 24

 dot11a supported-rate 9 18 36 48 54

 dot11b mandatory-rate 1 2

 dot11b supported-rate 5.5 11

 dot11g mandatory-rate 1 2 5.5 11

 dot11g supported-rate 6 9 12 18 24 36 48 54

#

wlan radio-policy 257

#

wlan radio-policy 258

#               

wlan service-template 1 clear

 ssid Wireless

 bind WLAN-ESS 0

 service-template enable

#

interface NULL0

#

interface Vlan-interface1

 ip address 10.x.1.18 255.255.128.0

#

interface GigabitEthernet1/0/1

#

interface WLAN-ESS0

 port link-type hybrid

 port hybrid vlan 1 untagged

#

wlan ap testap1 model WA2620-AGN

 description changeme

 

serial-id 219801A0AA909CG01373

 radio 1 type dot11a

 

radio-policy 257

 

service-template 1

 radio 2        

 

radio-policy 258

  service-template 1

#

 ip route-static 0.0.0.0 0.0.0.0 Vlan-interface1 10.33.1.1

#

 snmp-agent

 snmp-agent local-engineid 8000002B03002473960050

 snmp-agent community read public

 snmp-agent sys-info contact netadmin@somedomain.org

 snmp-agent sys-info location The Ozone

 snmp-agent sys-info version v2c v3

#

 ssh server enable

 sftp server enable

#

 load xml-configuration

#

user-interface aux 0

user-interface vty 0 4

 authentication-mode scheme

 user privilege level 3

#

return          

[WX3024]

=====================

Begin WA2620AGN Config

===============================

[WA2620-AGN]dis curr

#

 version 5.20, Beta 1102P01

#

 sysname WA2620-AGN

#

 info-center source LWPC channel 4

#

 telnet server enable

#

 wlan ac ip 10.x.1.18

#

vlan 1

#

interface NULL0

#

interface Vlan-interface1

 ip address 10.x.1.20 255.255.128.0

#

interface GigabitEthernet1/0/1

#

interface WLAN-Radio1/0/1

 description change radio1 description

#

interface WLAN-Radio1/0/2

#

 ip route-static 0.0.0.0 0.0.0.0 10.33.1.1

#

#

user-interface con 0

user-interface vty 0 4

 user privilege level 3

 set authentication password simple h3capadmin

#

return

[WA2620-AGN]

[jechandl]

With our wx5004, the version of code on the ap and the setup on the controller must match.  For example, the version of code on the AP determines whether or not it is allowed to connect.  On the wx5004, we use the command "wlan apdb WA2620-AGN Ver.A VX00R0XXBXXD0XX[SPXX]" to tell the controller what version is allowed to connect.  If it does not match, it downloads the wa2600a_fit.bin from the controller.  If that file is not consistent with the version specified, then you just run in a loop.  So....

1.)  Check to see if this is an option on your controller.  Can be seen in advanced settings/ap in the web version.

2.)  Verify the wa2600a_fit.bin on the controller matches the version you specified.

3.)  Watch the ap ( in console mode) and you will see a Image Load indication when the ap is downloading the new code.

Outside of that, every AP connects quickly and it works great.

[alexpina]

Solved the problem because the check did not and he continues talking to the AC. What form of registration of the AP in BC are you using? Serial self-id or by inserting the 20 characters?

[alexpina]

Solved my problem by updating the firmware of both the wx as ap. In my case I have the controller wx3010. I used the package version A3000_8G_PPoE_Wireless_Sw_v.5.20.R3111P02_WX3000_CMW5.20.R3111P02

[mario_grigioni]

I'm having the same problem with my WX3024 and my AP WA2620-AGN

WX3024 Software Version: Release 3111P10

WA2620-AGN Software Version: V100R001B71D022

And at the controller i just receive the message:

Failed to connect to AC for AP [Serial-ID 219801A0AA9113G03795].

[TecnologiaLibre]

dis    
<F1-WX3024-REG-01>display cu    
<F1-WX3024-REG-01>display current-configuration
#
 version 5.20, Release 3111P10, Release 3111P10
#
 sysname F1-WX3024-REG-01
#
 domain default enable system
#
 dns proxy enable
 dns server 192.168.128.5
#
 telnet server enable
#
 port-security enable
#
 portal server local_for_Vlan-interface1 ip 192.168.140.10 url http://192.168.140.10/portal/logon.htm
 portal trap server-down
#
 oap management-ip 192.168.140.15 slot 0
#
 wlan country-code DO
#
 wlan auto-ap enable
#
vlan 1
#
vlan 2
#
radius scheme system
 primary authentication 10.5.6.2 key Password
 key authentication radius
 user-name-format without-domain
radius scheme unibe
 primary authentication 10.5.6.2
 key authentication Password
 user-name-format without-domain
radius scheme unibe.inet
 primary authentication 10.5.5.2
 key authentication Password
 user-name-format without-domain
 retry 5
#
domain system
 access-limit disable
 state active
 idle-cut disable
 self-service-url disable
 domain unibe.inet
 authentication login radius-scheme domain.inet local
 authentication portal radius-scheme domain.inet local
 authorization portal radius-scheme domain.inet
 accounting portal radius-scheme domain.inet
 access-limit disable
 state active
 idle-cut disable
 self-service-url disable
#
dhcp server ip-pool cyborg
 network 192.168.140.0 mask 255.255.252.0
 gateway-list 192.168.140.1
 dns-list 192.168.128.5
 domain-name 1
 option 43 ip-address 192.168.140.10
#
user-group system
#
local-user admin
 password simple MyPassword
 authorization-attribute level 3
 service-type lan-access
 service-type ssh telnet
 service-type portal
local-user ftpadm
 password simple MyPassword
 authorization-attribute level 3
 service-type ftp
#
wlan rrm
 dot11a mandatory-rate 6 12 24
 dot11a supported-rate 9 18 36 48 54
 dot11b mandatory-rate 1 2
 dot11b supported-rate 5.5 11
 dot11g mandatory-rate 1 2 5.5 11
 dot11g supported-rate 6 9 12 18 24 36 48 54
#
wlan radio-policy 1025
#
wlan radio-policy 1281
#
wlan radio-policy 1537
#
wlan radio-policy 1793
#
wlan radio-policy 2049
#
wlan radio-policy 2305
#
wlan radio-policy 2561
#
wlan radio-policy 2817
#
wlan radio-policy 3073
#
wlan radio-policy 3329
#
wlan radio-policy 3585
#
wlan radio-policy 3841
#
wlan radio-policy 4097
#
wlan radio-policy 4353
#
wlan radio-policy 4609
#
wlan radio-policy 4865
#
wlan radio-policy 5121
#
wlan radio-policy 513
#
wlan radio-policy 5377
#
wlan radio-policy 769
#
wlan service-template 1 clear
 ssid Campus_WIFI
 bind WLAN-ESS 0
 service-template enable
#
wlan service-template 2 clear
 ssid Campus-Campus02
 bind WLAN-ESS 1
 service-template enable
#
ssl server-policy access-policy
#
interface NULL0
#
interface Vlan-interface1
 ip address 192.168.140.10 255.255.252.0
#
interface GigabitEthernet1/0/1
 port link-type trunk
 port trunk permit vlan all
#
interface WLAN-ESS0
 port link-type hybrid
 port hybrid vlan 1 untagged
#
interface WLAN-ESS1
 port link-type hybrid
 port hybrid vlan 1 untagged
#
interface WLAN-ESS2
 port link-type hybrid
 port hybrid vlan 1 untagged
#
interface WLAN-ESS3
 port link-type hybrid
 port hybrid vlan 1 untagged
#
wlan ap ap_001 model 7760_2750 id 2
 serial-id 9TZ4CWR0FA800
 radio 1
  radio-policy 513
  service-template 2
  radio enable
#
wlan ap ap_002 model 7760_2750 id 3
 serial-id 9TZ4CWR0F9200
 radio 1
  radio-policy 769
  service-template 2
  radio enable
#
wlan ap ap_003 model 7760_2750 id 4
 serial-id 9TZ4CWR0F8400
 radio 1
  radio-policy 1025
  service-template 2
  radio enable
#
wlan ap ap_004 model 7760_2750 id 5
 serial-id 9TZ4CWR0F8E00
  radio 1
  radio-policy 1281
  service-template 2
  radio enable
#
wlan ap ap_005 model 7760_2750 id 14
 serial-id 9TZ4CWR0F8440
 radio 1
  radio-policy 3585
  service-template 2
  radio enable
#
wlan ap ap_006 model 7760_2750 id 6
 serial-id 9TZ4CWR0F88C0
 radio 1
  radio-policy 1537
  service-template 2
  radio enable
#
wlan ap ap_007 model 7760_2750 id 7
 serial-id 9TZ4CWR0F7EC0
 radio 1
  radio-policy 1793
  service-template 2
  radio enable
#
wlan ap ap_008 model 7760_2750 id 8
 description FR-I-011-EGRU-002
 serial-id 9TZ4CWR0FD880
 radio 1
  radio-policy 2049
  service-template 2
  radio enable
#
wlan ap ap_009 model 7760_2750 id 9
 description FR-I-011-EGRU-001
 serial-id 9TZ4CWR0FAB00
 radio 1
  radio-policy 2305
  service-template 2
  radio enable
#
wlan ap ap_010 model 7760_2750 id 10
 serial-id 9TZ4CWR0F8B80
 radio 1
  radio-policy 2561
  service-template 1
  service-template 2
  radio enable
#
wlan ap ap_011 model 7760_2750 id 11
 serial-id 9TZ4CWR0F9240
 radio 1
  radio-policy 2817
  service-template 2
  radio enable
#
wlan ap ap_012 model 7760_2750 id 12
 serial-id 9TZ4CWR0FA580
 radio 1
  radio-policy 3073
  service-template 2
  radio enable
#
wlan ap ap_013 model 7760_2750 id 13
 serial-id 9TZ4CWR0F8B00
 radio 1
  radio-policy 3329
  service-template 2
  radio enable
#
wlan ap ap_014 model 7760_2750 id 15
 serial-id 9TZ4CWR0FBC40
 radio 1
  radio-policy 3841
  service-template 2
  radio enable
#
wlan ap ap_016 model 7760_2750 id 16
 serial-id 9TZ4CWR0FC900
 radio 1
  radio-policy 4097
  service-template 2
  radio enable
#
wlan ap ap_017 model 7760_2750 id 17
 serial-id 9TZ4CWR0FA600
 radio 1
  radio-policy 4353
  service-template 2
  radio enable
#
 wlan ap ap_018 model 7760_2750 id 18
 serial-id 9TZ4CWR0F9980
 radio 1
  radio-policy 4609
  service-template 2
  radio enable
#
wlan ap ap_019 model 7760_2750 id 19
 serial-id 9TZ4CWR0F98C0
 radio 1
  radio-policy 4865
  service-template 2
  radio enable
#
wlan ap ap_020 model 7760_2750 id 20
 serial-id 9TZ4CWR0F8080
 radio 1
  radio-policy 5121
  service-template 2
  radio enable
#
wlan ap ap_021 model 7760_2750 id 21
 serial-id 9TZ4CWR0FBF00
  radio 1
  radio-policy 5377
  service-template 2
  radio enable
#
wlan ids
 attack-detection enable all
#
 ip route-static 0.0.0.0 0.0.0.0 192.168.140.1
#
 snmp-agent
 snmp-agent local-engineid 8000002B034001C63EE6B4
 snmp-agent community read public
 snmp-agent community write private
 snmp-agent sys-info contact IT
 snmp-agent sys-info location Tecnologia
 snmp-agent sys-info version all
 undo snmp-agent trap enable flash
 undo snmp-agent trap enable standard
 undo snmp-agent trap enable ip address
 undo snmp-agent trap enable dhcp server
 undo snmp-agent trap enable configuration
 undo snmp-agent trap enable system
 undo snmp-agent trap enable wlan
#
 dhcp enable
#
 ssh server enable
 ssh user admin service-type all authentication-type password
 ssh user njcastillo@gmail.com service-type all authentication-type password
#
 ip https ssl-server-policy access-policy
#
 load xml-configuration
#
user-interface aux 0
user-interface vty 0 4
 authentication-mode scheme
 user privilege level 3
#
return
<F1-WX3024-REG-01> 

[Jasonl16]

I am having the same issue with an H3C WX3024 controller and a WA2612AGN access point. The Controller is at 5.2.0 release 3111P09 , access point is 5.20 1106P15. I get error Failed to connect to AC for AP. Also some times it trys to download the new firmware to the access point but the access point ending up in a rebooting cycle.

How do I fix this?