WX5004 + AP9552 fit issue with last SW version R2308P01

[jorgecalvi]

AP9552 doesnt goes up after upgrade to R2308P01 using the included wa2600a_fit.bin, APs load image and then reboot and start again but never goes up. any comments will be appreciated

Jorge

[merlin215]

Sounds like you did not upgrade the AP file on the AC controller to the correct AP file after upgrading the ac code . 

You must do both codes inside the AC 

Switch code and AP code 

The 9552 AP Fit code is wa2600a_fit.bin . Over write ( or upgrade ) this file on the AC controller after you upgrade the ac switch code  and you are all set .... 

The unit needs an upgrade for the AP and for the AC . It does NOT do this automatically . There is work on a newer code to fix this ....