Bytes Per Physical Sector <Not supported> ?

SOLVED

Hi People,

I have attached few D2600 and D2700 DAS to my HP DL 385 G7 using P411, but somehow all of the File System Info shows:

command: fsutil fsinfo ntfsinfo D:

Bytes Per Physical Sector <Not supported>

So I wonder what is the type of the disks in those DAE ?

Thanks in advance.

Best regards,

4 REPLIES 4

The smart array controller present a logical drive to the OS, not physical disks. For more details create an ADU report and have a look into.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!

Where can I find Advanced Disk Utility report ?

is that a separate install ?

Best regards,

You need the smart storage administrator utility.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!

@Torsten. yes, that does make sense.

Thanks for the suggestion.

Best regards,