HPE Community
Disk Enclosures
1753868 Members
7206 Online
108809 Solutions
New Discussion юеВ

Re: error in command view

 
Admsnap
Occasional Advisor

тАО04-23-2007 02:10 AM

тАО04-23-2007 02:10 AM

error in command view

While adding storage in command view ,I get th efollowing error :

Error Level 2
Error Code KAIC06400-E
Description An error occurred during processing on the subsystem (error code 1 = "2", error code 2 = "58578", meaning = "An error occurred in the disk subsystem. The configuration may be inconsistent. Click [All Refresh] and refresh the configuration."). If the configuration was being changed, refresh the subsystem. If you are a local user, contact the system administrator. :



Can any one tell me the possible reason and remedy ...


Thanks in advance ......

admsnap
0 Kudos
Reply
3 REPLIES 3
Admsnap
Occasional Advisor

тАО04-23-2007 02:39 AM

тАО04-23-2007 02:39 AM

Re: error in command view


I am also ataching error code file ....

admsnap
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО04-23-2007 06:50 AM

тАО04-23-2007 06:50 AM

Re: error in command view

Hi,

there are different management software solutions for VA-, EVA-, XP-arrays, and several libraries - all are called commandview for ...

What you are using?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Admsnap
Occasional Advisor

тАО04-23-2007 07:52 PM

тАО04-23-2007 07:52 PM

Re: error in command view



I am usingcommand view XP AE 5.5 ....
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.