HPE Community
Disk Enclosures
1834532 Members
2961 Online
110069 Solutions
New Discussion

Re: FC60 How to Setup?

 
Vinoth Kumar
Advisor

‎12-15-2003 05:01 PM

‎12-15-2003 05:01 PM

FC60 How to Setup?

Hi,

I want to reconfigure one FC60.
It has 4*73 GB disks and one controller.
I want it on Raid5.

I used the
#amutil -syswipe
command for initialising the disk media.

Can any one tell me how to assign the Array ID and configuration steps.



Thanks in Advance,

Vinoth kumar.
Life is like an Icecream Before melts Enjoy it.
0 Kudos
Reply
1 REPLY 1
malvin drakley
Esteemed Contributor

‎12-15-2003 08:24 PM

‎12-15-2003 08:24 PM

Re: FC60 How to Setup?

Hi Vinoth
here is the link to the FC60 user guide
see chapter 4

http://www.hp.com/cgi-bin/cposupport/ccsearch/iseek_redir?lang=en&display_lang=en&rnk=4&pname=hp%20surestore%20disk%20array%20fc60&sni=hpsurestor19163&qry=configure&ctflag=&stype=pn&ctry=us&tmv=0&url=http://h20000.www2.hp.com/bc/docs/support/SupportManual/lpg28374/lpg28374.pdf

hope this helps
malvin
Not me Chief, I'm Radar
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.