HPE Community
Disk Enclosures
1847451 Members
2976 Online
110265 Solutions
New Discussion

Re: Hot Spare joining Array

 
Ayman Altounji
Valued Contributor

‎01-14-2001 04:00 PM

‎01-14-2001 04:00 PM

Hot Spare joining Array

I have a ProLiant ML350 with a 431 Array controller. I currently have a RAID 5 with 3 active disks and a hot spare. I would like to add the hot spare to the active array. I am assuming that I can just load the on-line array utility and make the change, is this correct? Anyone done this and have some words of wisdom? Thanks in advance.
0 Kudos
Reply
2 REPLIES 2
Ayman Altounji
Valued Contributor

‎01-16-2001 04:00 PM

‎01-16-2001 04:00 PM

Re: Hot Spare joining Array

Yes this is correct you can add this on the fly.
0 Kudos
Reply
Ayman Altounji
Valued Contributor

‎02-05-2001 04:00 PM

‎02-05-2001 04:00 PM

Re: Hot Spare joining Array

Thanks for the Assistance mpett1 .....
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.