HPE D2600 Disk Enclosure issues

[AKlasen]

Hello, I have a D2600 that was laying around that I am redeploying into my home network, When I plug it in I get fault lights on the front and back and the fans stay at 100 percent. I currently have one 460W PSU from the parts page with 0 Drives currently in the system. I do have a second PSU coming with 2 14AWG cables to see if that fixes the issue but I thought I'd give here a chance. Thanks for any help provided.

[BPSingh]

Greetings!

Please check what LED indication that you have in the front and rear including the power supply.

Refer page 11 https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-c02212004

Two power supplies provide the necessary operating voltages to all controller enclosure components. If one power supply fails, the remaining power supply is capable of operating the enclosure. (Replace
any failed component as soon as possible.) If one of the two power supply modules fails, it can be hot-replaced.

Mixing of power supplies in the same server is not supported, must be the same spare part number 

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c02665649#N10470