HPE EVA P6350 storage issue

[RanjithKumarb36]

Hi Team, Please assist with the below request. 1) We have HPE EVA P6350 storage with 2 Disk Enclosures. Planning to format completely and create new setup. But we couldn't move forward with the errors. Couldn't delete the old MG and when we create new MG, the certificate is not allowing to move on. Used the Command prompt, but no luck. please help us with the complete format with any steps / documents and create new setup with the hardware. the storage shows uninitialized, when we try to initialize, it shows "No disk available to initialize" in command prompt, we are trying to refresh, it shows "Error: Error storage cell needs to be created to perform this action"

[sbhat09]

Hello @RanjithKumarb36,

You may find this hardware compatibility guide useful - https://support.hpe.com/hpesc/public/docDisplay?docId=c03784735

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of the company.

[RanjithKumarb36]

Hi, @sbhat09 Thank you for the details.

The link that you shared it contains only the spare part details. 

I'm looking for the document to configure the EVA P6350 storage from the scratch, Please assist. 

we are Making sure that We are not bothering about the data. 

[rmv978]

Check and ensure all the disk are healthy.

Verify the health of the Enclosures, LED status on the IO modules.

Power cycle the array. 
First the disk enclosures should be powered ON and then the controller enclosure.

Then retry to initialize the array.

If issue persist engage support as serial log needs to be analyzed.

[RanjithKumarb36]

Hi, @rmv978 Thank you for the Guides. 

Happy that get a positive note from the below message. 

Could you please help out with the configuration guide? 

We have the v10.3 HPE P6000 Command View app to manage this environment. 

And the FW is running with 10.0.0.1. 

[rmv978]

Commad view user guide available in the below link.

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03375092

[RanjithKumarb36]

Hi @rmv978,

Thank you for the document and link.

We have issue during initialization, please assist. 

"Curreently, the storage shows uninitialized, when we try to initialize, it shows "No disk available to initialize" in command prompt, we are trying to refresh, it shows "Error: Error storage cell needs to be created to perform this action"

[rmv978]

Serial logs needs to be analysed to check why "No disk available to initialize"  error message,when you are trying to initilize.

Hence please engage support.