MSA 1000 on rp4440 with 4 processors...please help!

[Gabriel_52]

I have an rp4440 with 4 processor and everything update, patches, firmware,etc and I have connected one MSA 1000(with latest version of firmware) with 6 drives of 72GB, when I create 3 lun's of 2 drive each one I have many problems in the rp4440 I only see one lun using sam but I have 3 created!! and when I try of use ioscan -fnC disk I see 50 diferent device files what is happening
Please Help!!!!

[Uwe Zessin]

You cannot use SAM to manage this storage and most likely you have not applied the proper profile to the connection(s) on the MSA.

[Ted Buis]

The msa1000 can only have one controller physically present in the array when used with HP-UX. You must use the command line interface to set up the array.

[Gabriel Jiménez Salazar]

thanks for your help I resolve the problem

[Uwe Zessin]

come on - tell us what the problem was and how you fixed it...

[Alexander Santamaria Ji]

Gabriel;

It will be very useful if you share your experience on how to solve this problem.


Best Regards,

Alexander