MSA1000 coexistence of Linux and MS cluster

[Amar_Joshi]

I was reading through the MSA1000/1500cs service and support student guide and it mentions;

"Microsoft and NetWare clusters and single servers running Secure Path can concurrently access an MSA1000. At this time, Linux clusters or single servers cannot access the same MSA1000 being accessed by clusters or servers with Windows or NetWare running Secure Path software."

Is this restriction removed? If yes then which firmware level onward it's supported?

Thanks for reading and advance thanks for replying.

[Rob Leadbeater · Accepted solution]

Hi,

I always take the SAN Design Reference Guide, as the document of truth:

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00403562/c00403562.pdf

The table on page 203 should tell you what you need.

Cheers,

Rob

[Amar_Joshi]

Thanks Rob,

It's helpful stuff.