MSA1000 Windows Event ID 1148

[Gonzo78]

One of my Windows 2000 clustered servers is reporting a error in the system event log. Every two minutes it reports a error 1148 four times in a row. It says the array accelerator status has changed.

Type: Error
Source: Storage Agents
Event ID: 1148
Event Time: 10/10/2005 12:13:33 PM
User: n/a
Computer: W2KADMIN1
Description:
Compaq External Array Accelerator Status Change. The array
accelerator board attached to the external controller
in I/O slot 1 of array "9J2AJN71S6G1" has a new status of 3.
(Accelerator
status values: 1=other, 2=notConfigured, 3=enabled, 4=tmpDisabled,
5=permDisabled)
[SNMP TRAP: 16017 in CPQFCA.MIB]
The LCD display on the controller says everybody is happy. Any ideas?

[John Kufrovich]

did you make any changes to your configuration during that time. We turn off the cache, during any configuration changes. Then turn it back "On" once everything is completed.

[Gonzo78]

No. No changes were made. It just keeps repeating the message 4 times in a row every 2 minutes that the cache has been enabled. There are never any messages saying it was disabled. It has been happening for 5 or 6 days 4 times in a row every 2 minutes.