Disk Enclosures
1834348 Members
1947 Online
110066 Solutions
New Discussion

Re: msa1500 cli commands

 
daniel pangallo
Advisor

msa1500 cli commands

Are there CLI commands to enable cache batteries on msa1500's? see attached show THis controller output:

Cache:
0 megabyte read cache 512 megabyte write cache Version 2
Cache is GOOD, and Cache is enabled.
No unflushed data in cache
Batteries are disabled
Module #1 is fully charged and turned off.
Module #2 is fully charged and turned off.
Controller Up Time:
34 Days 19 Hours 37 Minutes 53 Seconds
Health:
Surface Scan: Complete.
Rebuild Status: Complete.
Expansion: Complete.
1 REPLY 1
John Kufrovich
Honored Contributor

Re: msa1500 cli commands

No.
Batteries will be enabled once there is write data in cache.

jk