msa1500cs/msa30

[ml570g4]

i have msa1500cs connected with msa30 by scsi cables. when i switch system on and during the initialization process, it gives the following error message"30 I2c read failure EMU" this system is new and also i can not navigate through arrows, it seems lcd stucked. what is the problem ??is that means EMU module need to be replaced or the upgrade kight be solve the problem??

[IBaltay]

Hi, try to first flash the firmware MSA30 disk enclosure firmware included. If the firmware upgrade is successfull, we will see if it reoccurs

[Víctor Cespón]

Do you power on the MSA30 before the MSA1500?

[ml570g4]

how can i uppgrade msa30?? and which cable should i use to connect my laptop to EMU port ? and where i can find the procedure for upgrading the msa30 firmware?. i noticed that EMU accepts normal RJ45 connector not like MSA1500 cs controller which uses RJ45Z, so i need to know is it requires cross cable or special cable ???

[IBaltay]

Hi,
use the firmware flash utility, it usualy upgrades all needed firmware also on the attached disk enclosures