MSA60 StorageWorks Array

[joe youssef]

Dear all,

I have a new MSA60 to be directly attached.
my question is, after i poweron this MSA60 should the disks (SATA 1 Terra )configured into it give a green light or no ?

Thanks & regards

P.S. This thread has been moved from Disk to Disk arrays. - Hp Forum Moderator

[Ajohansen]

Hi Joe,

The drive LED will only turn green once you have configured an array on the MSA.

If both LEDs are off then the drive is offline, a spare, or not configured as part of an
array.