MSA70 dual domain with dual P800 controller

[stefano colombo_1]

Looking in old thread I found that such configuration wasn't supported ( in 2008) . I'd like to know if anything has changed because I should do the same configuration

[Johan Guldmyr]

Is supported now.

See the quickspecs:
http://h18004.www1.hp.com/products/quickspecs/12652_div/12652_div.HTML

Just make sure you have updated firmware on the MSA70 and the controllers.

[stefano colombo_1]

I've read that and it seems to me that it still support only ONE P800 in the host

"On HP ProLiant servers Dual Domain support is available for the HP Smart Array P800 attached to a MSA70 with the addition of the HP StorageWorks Dual Domain I/O Module Option (AG779A). (Single initiator environment only.)"

Am I wrong ?

[Johan Guldmyr]

I don't think so.

The document "HP StorageWorks MSA60/70 I/O module Installation instructions for dual domain configurations (463073-002, April 2008)"

only mentions dual domain installations with one controller.

[stefano colombo_1]

that's what I understand .
A configuration with dual P800 conencted to the dual module is not supported

thanks
Stefano