old raid 5 probs

[prodmanagr]

We have a Compaq Proliant ML-350 with a SmartArray 431 controller running 3-18.2 GB Ultra3 Scsi drives in a raid 5 configuration. We are running Novel Netware 5 with support pak 3 installed. I have started getting messages that the failure of drive 1 is emminent, and that I should replace this drive as soon as possible. Trouble is, I have not been able to find any of the "hot swap" 18.2 gig drives. Lots of 73 gig and 146 gig drives, but can I use them to replace the failing drive or do I have to replace them all with the same size drives to maintain the raid configuration? If I can use one of these different size drives, do I just pull out the old one and stick in the new one? Is there a set of directions somewhere for replacing drives in a raid 5 set?

[sandeep_raman · Accepted solution]

Hello prodmanagr,

Check http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=PSD_CN0304W&jumpid=reg_R1002_USEN
ftp://ftp.compaq.com/pub/products/servers/proliantstorage/drives-enclosures/ss-array-rebldg.pdf

Afaik, its a better practice to replace with the same size disk always.

SRH

[Marcial Wils]

The size of the drive is not an issue, just keep in mind that the disk usage for your logical will be the same capacity for the smallest drive in the array.

What you really need to take care of is the speed and the technology.

both, speed and technology of all the disk drives need to be the same.

by technology I mean SATA or IDE eg.

[prodmanagr]

Drives are SCSI Ultra3's 10K. Found replacements on eBay. Now the next question is what if the drives have data on them. when I stick it in the hotswap slot, will my drives overwrite it or will it overwrite mine??

[sandeep_raman]

Well,pull out the failed/predictive failure disk and plug in the new/replacement disk in the same slot and data will be rebuilt to the replacement disk. This is the advantage of hot plug disks.

SRH

[Marc Carney]

ONLY pull the bad disk out if it is actually physically lit up amber/red on the disk, otherwise the whole array may corrupt. It doesn't matter what data may be on the replacement disk as the system will detect it as a replacement and start to rebuild the data when you insert it.

[prodmanagr]

OK, Marc! Now that confuses me! The computer displays a message when I boot saying that failure of disk one is imminent! Please replace as soon as possible. No red lights or anything else. Why not replace it now before it fails??

[sandeep_raman]

This is a predictive failure warning i suppose and the led may be green still.
It could be a storage sub-system fault which may have triggered this warning.
If you can schedule a downtime,update all the firmwares by booting off the F/w cd and see if it helps,else replace the disk.

Let me know the server generation and i'll check if f/w cd would work or not.

SRH

[sandeep_raman]

Though its quite an old doc(6Pg),technology and concept is more or less the same. Hope it clears your doubts/confusion.

http://h20000.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_11dt-119a-wwen/TPM_11dt-119a-wwen.pdf

SRH

[prodmanagr]

Sandeep,
I don't think there is a generation. This is a COMPAQ ML-350 and it was one of the first ones out. It is at least 6 years old.

[sandeep_raman]

Firmware Cd,

http://h18023.www1.hp.com/support/files/server/us/download/24777.html

Check whats the model number of the suspected disk and compare with this list,

http://h18007.www1.hp.com/support/files/storage/us/locOsCat/99_56.html

If you are ok to patch the server,schedule a downtime and install the latest PSP which has the latest drivers and HP utilities.

http://h18023.www1.hp.com/support/files/server/us/download/24182.html

SRH

[prodmanagr]

Sandeep,
I get a 404 error on the last entry you sent me.
Dave

http://h18023.www1.hp.com/support/files/server/us/download/24182.html

[sandeep_raman]

Not sure why because it loads the page on my box.

Check if this one works,

http://h18023.www1.hp.com/support/files/server/us/locOsCat/32_15.html

Else, www.hp.com
In the search option type psp 7.60 novell and the first hit should be the download link.

SRH

[prodmanagr]

Sandeep,
Thanx! Got the stuff! Looks like a busy weekend coming up!
Dave