HPE Community
Disk Enclosures
1840152 Members
2788 Online
110161 Solutions
New Discussion

Problem attaching Promise vtrak 15100 to smart array 5i

 
Bob Resnikoff
Occasional Contributor

‎09-11-2004 05:41 PM

‎09-11-2004 05:41 PM

Problem attaching Promise vtrak 15100 to smart array 5i

I'm trying to connect a Promise raid box (vtrak 15100, 15X 250gb disks) to the external scsi port (port 1) on a DL 380 G3 (all of this is new equipment). I defined two logical volumes on the vtrak at raid 5, each 1.5TB (seven disks) and assigned each a separate scsi id (4 and 5). The volumes showed up during the smart array initialization, and I was able to define each of them as raid 0 devices to the 5i. Unfortunately, the smart array showed only about 1400GB for each logical volume instead of 1500. Is there a way to get back the missing 200GB? Thanks.
0 Kudos
1 REPLY 1
Bob Resnikoff
Occasional Contributor

‎09-25-2004 01:59 AM

‎09-25-2004 01:59 AM

Re: Problem attaching Promise vtrak 15100 to smart array 5i

not a real issue; stupid user problem.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.