question - RAID Disk

[Eli Daniel]

good morning
i have the question:

how know the type the RAID in the diks?

the disk asigne is EMC - (power Path)
also command for see?

[Michael Steele_2 · Accepted solution]

symdev list
symdisk -sid SID

[Eli Daniel]

hi,
SAPL917:/> symdev list
sh: symdev: not found.
SAPL917:/> man symdisk
No manual entry for symdisk.
SAPL917:/>

[Suraj K Sankari]

HI,
You have to give the full path..
or find the symdev command

find / -name symdev


Suraj

[Eli Daniel]

SAPL917:/> find / -name symdev
SAPL917:/>

nothing

[Michael Steele_2]

/usr/symcli/bin/symdev

[Eli Daniel]

SAPL917:/usr> pwd
/usr
SAPL917:/usr> cd symcli
sh: symcli: not found.
SAPL917:/usr>

note:
The software SAM (EMC power path)

[Michael Steele_2]

symcli stand for symmetrix command line interface. It is the stand EMC disk array package. And it is obviously not installed on this box. Perhaps another? Even windows?

[Steven E. Protter]

Shalom,

One would need to actually install the EMC utilities prior to using them.

SEP

[AVV]

Hi,

Looks like EMC utilities to be installed prior to use.

[Eli Daniel]

SAPL917:/> powermt display dev=all
Symmetrix ID=000290100942
not see the type RAID

Logical device ID=26D0
state=alive; policy=SymmOpt; priority=0; queued-IOs=0
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
0 1/0/4/1/0/4/0.19.100.0.0.0.5 c0t0d5 FA 7bB active alive 0 0
2 0/0/4/1/0/4/0.20.100.0.0.0.5 c2t0d5 FA 8bB active alive 0 0

[Michael Steele_2]

Hi

Here's the man page for powermt. Note that this is a HBA command that reports on HBA load balancing. It has nothing to do with configuring disk arrarys.

http://www.eygle.com/unix/Man.Page.Of.Powermt.htm

[Eli Daniel]

sorry,
no command to view the disk Raid?

[Eli Daniel]

Thanks