Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

show to manage MSA on OS?

 
SOLVED
Go to solution
Highlighted
Valued Contributor

show to manage MSA on OS?

guys,
what software is used to manage MSA on OS? where to get this software and the user guide?

regards
Stephen
15 REPLIES 15
Highlighted
Acclaimed Contributor

Re: show to manage MSA on OS?

What MSA model (there are so many) and what OS?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Honored Contributor

Re: show to manage MSA on OS?

http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-001&h_lang=en&h_cc=us&h_product=304670&h_client=S-A-R163-1&h_page=hpcom〈=en&cc=us

Link to MSA1000 and above.
Select the right one and then on manuals on the next page.
Highlighted
Valued Contributor

Re: show to manage MSA on OS?

let's consider it was a MSA1000, and people said it could be managed by ACU,is that right? and it is an HP_UX 11.11.
Highlighted
Acclaimed Contributor
Solution

Re: show to manage MSA on OS?

Well, there is an ACU as CLI for HP-UX, but I have never seen it.


Consider to use ACU from a windows/linux proliant or the CLI over serial line (even from hp-ux).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Valued Contributor

Re: show to manage MSA on OS?

Torsten,
>but I have never seen it.
you meant that ACU was not an HP_UX suitable software?

>CLI over serial line (even from hp-ux).
what is this CLI called?

and please explain more about ACU.

regards
Stephen
Highlighted
Valued Contributor

Re: show to manage MSA on OS?

it is so expensive for me to manage MSA using cable, so I just want to know how to manage MSA from os.
Highlighted
Acclaimed Contributor

Re: show to manage MSA on OS?

You probably know the ACU from windows, this is a nice GUI.

There is also an OS based CLI available, also a version for hp-ux (a CLI, no GUI).


The CLI over serial line is running on the controllers, you just need to connect via a serial cable (9 pin to RJ11) directly to one of the controllers to get access to this CLI.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Valued Contributor

Re: show to manage MSA on OS?

an ironic fact is that this serial cable for MSA cost more than one thousand YUAN here, much more than i could afford
Highlighted
Acclaimed Contributor

Re: show to manage MSA on OS?

All I have are the release notes from an older version - attached.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!