HPE Community
Disk Enclosures
1847211 Members
6575 Online
110263 Solutions
New Discussion

Smart Array 6400 "Check SCSI Cable" at POST

 
provels
New Member

‎04-09-2007 08:44 AM

‎04-09-2007 08:44 AM

Smart Array 6400 "Check SCSI Cable" at POST

I am having this error at boot on an older ML530. I'm using 6 - 146GB U320 wide drives (BF14688577) and they are down-shifting to narrow. The cable has already been changed and the ML530, the 6400, and the drives all have the latest firmware from the 7.70 maintenance CD. However, the POST error remains. FWIW, a Smart Array 641 is also present Iin this box, as well as 6 - 72GB U320 drives (BF0728A36) and they are functioning normally. Appreciate any responses, thanks for reading.
0 Kudos
1 REPLY 1
provels
New Member

‎04-10-2007 05:23 AM

‎04-10-2007 05:23 AM

Re: Smart Array 6400 "Check SCSI Cable" at POST

Disregard. Short answer was to reseat the card. I should know better.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.