Supply LUNs using the iSCSI protocol

[Lemsibih]

Greetings,

Let me tell you about a customer who has a Storage 3par, model "HP_3PAR 8200" and needs to supply LUNs using the iSCSI protocol.

The "showport -i" command shows that haven´t CNA cards; therefore he needs to acquire them.

N:S:P Brand       Model                  Rev Firmware                   Serial                    HWType

0:0:1 EMULEX    LPE16002            30  11.4.415.0                    Onboard             FC

0:0:2 EMULEX    LPE16002            30  11.4.415.0                    Onboard             FC

0:1:1 LSI               9300-2P               02  10.10.03.00                  Onboard             SAS

0:1:2 LSI               9300-2P               02  10.10.03.00                  Onboard             SAS

0:2:1 HPE             560SFP+              n/a 5.1.0-k-rh7.5             MYI6140402       Eth

0:2:2 HPE             560SFP+              n/a 5.1.0-k-rh7.5             MYI6140402       Eth

0:3:1 Intel           e1000e                 n/a 3.2.6-k                         Onboard             Eth

1:0:1 EMULEX    LPE16002             30  11.4.415.0                    FC44584119        FC

1:0:2 EMULEX    LPE16002            30  11.4.415.0                    FC44584119        FC

1:1:1 LSI               9300-2P               02  10.10.03.00                  Onboard             SAS

1:1:2 LSI               9300-2P               02  10.10.03.00                  Onboard             SAS

1:2:1 HPE             560SFP+              n/a 5.1.0-k-rh7.5             MYI614043G      Eth

1:2:2 HPE             560SFP+              n/a 5.1.0-k-rh7.5             MYI614043G      Eth

1:3:1 Intel            e1000e                n/a 3.2.6-k                          Onboard            Eth

But also, he wants to know if it requires any additional license or particular software.

Thank you advance

[sbhat09]

Hello @Lemsibih,

Can you please provide the exact error message. I will check and get back to you.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of HPE.

[Lemsibih]

@sbhat09 

Hello Srinivas, Thanks for your answer.

I comment you, I don't really have any errors. I just want to know, if is necesary any additional license or particular software to provinding LUNs using the iSCSI protocol.

Thank you advance

[sbhat09 · Accepted solution]

Hello @Lemsibih,

Please look at the page no 16 for the details - https://www.hpe.com/psnow/doc/c04607918

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of HPE.

[sbhat09]

Hello @Lemsibih,

Have you found it helpful? Let me know if you need further assistance on this.

Regards,
Srinivas Bhat

If you feel this was helpful please click the KUDOS! thumb below!
Note: All of my comments are my own and are not any official representation of HPE.

[Lemsibih]

Hi Srinivas

Your help has been significant... Thanks ... you can close the case.

Regards,
Hibismel