Trying to locate EMA, EVA Serial Number....

[RTMJ]

Is there anyway I can locate the s/n of EMA and EVA storage box without resorting to do a physical check?

From SWCC and Commandview EVA, I can only see the s/n of the controllers.

But what I'm really after is the serial number of the entire EMA & EVA.

Please advice...thanks in advance.

[Uwe Zessin]

This information is not stored in the system when it is delivered from manufacturing. The only safe way is to inspect the hardware and/or check the delivery papers.

[Amar_Joshi]

For some good reasons, EMA/EVAs do not follow the controller/chassis serial number. Serial number used for identification, is located on the rack. First 2 characters show country of origin (US=USA, SG=Singapore etc.).

For all those who are reading this, as a best practice, I always record the serial number in CommandView (during the setup) at bottom where the comments are stored.

my 2 cents worth.