HPE Community
Disk Enclosures
1833187 Members
2713 Online
110051 Solutions
New Discussion

unable to configure VA 7110 with rp5470

 
Jaweed
Occasional Advisor

‎06-28-2009 06:12 AM

‎06-28-2009 06:12 AM

unable to configure VA 7110 with rp5470

I'm unable to configure va7110 with rp5470.

My present setup,
2 rp5470 server with 2 HBA's each connected to va 7110 thru HP SAN Switch 2/8-EL (322120-B21) x 2 No.s.

Issues are,
1) There is no link between server and san switch.
2) when connected to san switch thru Hyperterminal....its blank...no information.
No body know the IP for the switch.
3) steps to configure va7110 to rp5470 servers.

I have already installed the Command view "cvsdm_PA_11_23_v10902".

0 Kudos
Reply
3 REPLIES 3
Torsten.
Acclaimed Contributor

‎06-28-2009 09:42 PM

‎06-28-2009 09:42 PM

Re: unable to configure VA 7110 with rp5470

>>"There is no link between server and san switch"

Check cable, GBICs and port speed settings first.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Jaweed
Occasional Advisor

‎06-29-2009 08:30 PM

‎06-29-2009 08:30 PM

Re: unable to configure VA 7110 with rp5470

Torsten,

I have checked earlier...No issues with the cable.
0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎06-29-2009 09:08 PM

‎06-29-2009 09:08 PM

Re: unable to configure VA 7110 with rp5470

First you need a link!

Did you already check the speed settings on switch and array?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.