Disk firmware upgrade

[Mukul_Upadhyaya]

Hi,
Need to know what is the latest firmware revisions available for ->

1. Product Id: ST318404LC Vendor: SEAGATE

2. Product Id: MAJ3182MC Vendor: FUJITSU

3. Product Id: DMVS18D Vendor: IBM

Also from where I can download the firmware for the above ?

Cheers
Mukul

[goldboy]

you can download the firmwares from the following link:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=19181&prodTypeId=12169&prodSeriesId=33747&swLang=13&taskId=135&swEnvOID=7

check the release notes for your specific disk information

Tal

[Mukul_Upadhyaya]

Tal,
Thanks for responding. The link contains the firmware for following Seagate disks and not the one I am looking for->
ST3146807L HP 146 GST3146807LC HPC4 628800
ST318453C4 HP 18.2GST318453LC HPC4 628800
ST336607C4 HP 36.4GST336607LC HPC4 628800
ST336753C4 HP 36.4GST336753LC HPC4 628800
ST373307C4 HP 73.4GST373307LC HPC4 628800
ST373453C4 HP 73.4GST373453LC HPC4 628800

Cheers
Mukul

[goldboy]

you need to pick the: PF_DIPFSC1106EFI.tar.gz (40 MB)


here is the direct link:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12169&prodSeriesId=33747&swItem=ux-46405-1&prodNameId=19181&swEnvOID=7&swLang=13&taskId=135&mode=4&idx=0

you will see that 2 disks firmware you need is in that bundle (see release notes)



Tal

[Mukul_Upadhyaya]

Tal,
Thanks again. I need to upgrade the internal and external disk connected to SC10 on HP 9000/800/L2000-44 servers. The link is for integrity server. My mistake. I should have written this in the beginning.

Cheers
Mukul

[Mukul_Upadhyaya]

I currently have a mix of firmware - HP01, HP04 and HP06, on ST318404LC and need sync them to one rev. level
# diskinfo -v /dev/rdsk/c1t2d0
SCSI describe of /dev/rdsk/c1t2d0:
vendor: SEAGATE
product id: ST318404LC
type: direct access
size: 17783240 Kbytes
bytes per sector: 512
rev level: HP06
blocks per disk: 35566480
ISO version: 0
ECMA version: 0
ANSI version: 3
removable media: no
response format: 2