hooking up old diskstorage to system

[Henry Chua]

Hi guys,

I am trying to hook up an old disk arrays to my system running UX10.20b.

Array info:
Storage enclosure
[deskside enclosure]
model A3311A
P/N A3311-60001 C3637A/4C0:

-Anyone know how I should set it up?

-By the way how do i configure the dip switches for each disk bay in the tower?

-Does anyone has the tech notes on it?

Thanks
Henry

[melvyn burnard · Accepted solution]

This is not an array, but a JBOD enclosure.
It could hold up to 8 units, either Single Ended or Fast/Wide SCSI.
It has 4 connectors, and each set of 4 slots can be set up as a separate "entity" by cabling correctly.

These are very old units, but still very useful.
This may be what you are after
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpg67068
This link can provide info on parts and also a manual.

http://partsurfer.hp.com/cgi-bin/spi/main?sel_flg=modsrch&template=main&cpric=&prodsrch=A3311A