jumper set in ultra 3 scsii 18.2GB

[Manos Valergakis]

I bought a new scsii drive, model BD01878275, to replace one older scsii drive, model BD018745A3, which has problem. The new drive has different jumper sets. First set has:
+5 VOLTS

RESERVED
PARITY DISABLE
WRITE PROTECT
MOTOR START ENABLE
DELAY MTR START
FORCE SINGLE ENDED
... and the second set has:
1
2
4
8
RES


I wont to set my drive in ID=1. How to put the jumpers in disk?