HPE Community
Disk
1833779 Members
1943 Online
110063 Solutions
New Discussion

Jumpers for Digital DSP5200S

 
Ayman Altounji
Valued Contributor

‎03-30-2001 04:00 PM

‎03-30-2001 04:00 PM

Jumpers for Digital DSP5200S

I need to set this disk to provide the termination power. Does anybody have the jumpers description?

thanks
0 Kudos
1 REPLY 1
Ayman Altounji
Valued Contributor

‎04-07-2001 04:00 PM

‎04-07-2001 04:00 PM

Re: Jumpers for Digital DSP5200S

Finally I found it. Could be it will help to somebody else, here is the jumpers' description:

There are ten (or eleven for DSP5350) pin pairs between the SCSI and power connector. They are numbered from the SCSI connector (from right to left). First three pairs (1-2, 3-4, 5-6) are represent the SCSI ID. For termination power the pairs 15-16 and 17-18 must be shorted.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.