SC-10 disk enclouser and 4 m Card

[harry_7]

Hi all,

I have one SC-10 box, L-3000 with 4m (04 channel card). One of the customer has switched off the SC-10 box and removed the Power sypply also for whole night. Now we are not able to recover the existing configuration. That particular channel shows all the disks are failed. While I am trying to connect to other channel I can see all the disk's.

How I can recover/move the configuration from one cannel to free channel.

Other wise I have to reconfigure whole thing .......

Regards

Harpreet Singh

[harry d brown jr · Accepted solution]

The SC10 is JBOD (Just a Bunch Of Disks). Did the customer put the power supply back in and get the SC10 back up and running? Did the customer shutdown the L-class before shutting down the SC10 to remove the power supply?

Once the SC10 is running, you should shutdown your L-class and reboot, this should force an fsck on the SC10.

live free or die
harry