sc10 question

[Jimmy Tom_2]

ANyone knows if the sc10 will work with a K460 server running HP-UX 10.20.

thanks

[Robert_Jewell]

The SC10 requires a Low Voltage Differential interface. I dont believe there is one available for the K class systems. Per the manual these boxes are supported on the A, N, and V class servers although I am sure they work on the L class as well.


-Bob

[Vincent Fleming]

There are converters (HVD ->LVD, SE->HVD, etc.) available. I'm unsure if HP has a model, but I've used (in a previous life) Paralan (www.paralan.com) devices, and they worked well. You should check with your HP support rep about the supportability of Paralan devices in your configuration.

Good luck!

[Sajid_1]

Hi Jimmy,

SC10 will not work directly with the K460 server. You need to have a LVD/HVD converter to do this. You could connect these systems with SC10 - L, N etc.

You can also connect storage systems like AutoRAID 12H, HASS disk boxes, Model 10 disk array, Model 20 disk array etc. to K class system

rgds,